Beyma WL3 40W, 0.8-inch Neodymium Waveguide Compression Driv

Produktinformation
Recensioner

Beyma WL3 40W, 0.8-inch Neodymium Waveguide Compression Driver (Set of 2) Produktnr: 9000-0102-8542 Garantitid: Denna produkt levereras med 2 års garanti.

Allmänt

The 0.8 inch Beyma WL3 high-frequency compression driver comes partnered up with a 3 inch waveguide to switch the focus to reducing interference and minimising acoustic loss. Ideal for finishing off array systems, this driver comes fitted with a neodymium magnet and a lightweight 1.75 inch voice coil. The level of quality is carried through to a polyester diaphragm that supports a 700Hz to 20,000Hz frequency range, while the sensitivity sits at 105 decibels. Once installed, the WL3 promises an AES power rating of 40 Watts at 8 Ohms.

Specifikationer

Produktfunktioner

Diameter tweeter 0.8 inches
Sustainable product not specified
Känslighet 105 dB
Inklusive horn Ja
Maximal frekvens 20 - 20,9 kHz
Minimal frekvens 500 - 999 Hz
Nominellt motstånd 8 Ohm
RMS-belastning i Watt 0 - 49 Watt
Throat exit ej tillämpbart
Typ magnet neodymium

Vikt och mått inkluderar förpackning

Vikt (inkl. förpackning) 2,1 kg
Mått (inkl. förpackning) 24,8 x 21,0 x 9,0 cm

Produktspecifikationer

technical specifications:
- throat diamter: 20.5mm/0.8"
- flange height: 76.2mm/3"
- nominal impedance: 8 Ohms
- impedance: 5.5 Ohms at 4.5 khz
- Re: 4.5 Ohms
- power: 40W AES over 1.5Hz
- program power: 80W over 1.5kHz
- sensitivity: 105dB 1W at 1m coupled to horn
- frequency range: 700 Hz - 20,000 Hz
- recommended crossover frequency: 1.5kHz or higher (12dB/oct min. slope)
- speaker coil diameter: 44.3mm, 1.75"
- flux density: 1.8 T
- BL factor: 8 N/A
- diaphragm material: polyester
construction:
- diameter: 80mm
- depth: 142mm
- mounting: x4 6mm screw holes
- net weight: 1 kg
- magnet: neodymium

Recensioner

Lämna en recension

Det finns ännu inga recensioner för den här produkten.