- Hem /
- Produkter /
- Pro Audio /
- Högtalare /
- Aktiv fullrange /
- dB Technologies /
- dB Technologies Flexsys F315 aktiv högtalare
dB Technologies Flexsys F315 aktiv högtalare
Allmänt
The F 315 is an active three-way speaker developed for full-range use. This speaker reaches relatively low frequencies, so an extra subwoofer isn't essential. A bi-amped 1,000W RMS Digipro class D amplifier with switched-mode power with PFC controls the entirety. Furthermore, its powerful 15-inch woofer is mounted in a bass reflex chassis and delivers a powerful low-end punch.
The specially designed double horn section, equipped with a 6-inch horn-loaded mid-range driver and a 1-inch compression driver, accounts for the mid and high frequencies. Finally, all components receive precise frequencies so they can function at their best, and so you can get the most out of the speaker.
Specifikationer
Produktfunktioner
- Diameter tweeter 1 tum
- Lämpad som monitor nej
- Vikt per högtalare 31 kg
- Inbyggd EQ nej
- Maximal SPL 130 dB - 139 dB
- Maximal frekvens 20 - 20,9 kHz
- Minimal frekvens 40 - 49 Hz
- RMS-effekt i watt 750 - 1499 Watt
- Utgång för passiv högtalare nej
Vikt och mått inkluderar förpackning
- Vikt (inkl. förpackning) 31,0 kg
- Mått (inkl. förpackning) 98,5 x 58,0 x 51,5 cm
Produktspecifikationer
- 3-way active speaker
- frequency response: 47 to 20,000 Hz at - 10 dB
- frequency response: 60 to 19,000 Hz at +/- 3
- maximum sound pressure: 131 dB (SPL)
- 1-inch HF compression driver with 1.5-inch voice coil
- 90 x 40 degrees directivity
- CD horn
- 1x 1.5-inch woofer with 3-inch voice coil
- 1x 6.5-inch horn-loaded mid-range driver with 2-inch voice coil
- Digipro amplification technology
- class D amplifier
- HF amplification of 500 W
- LF amplification of 500 W
- convection cooling
- DSP 24-bit / 48 kHz processing
- flat and processed system presets
- dual active limiter for peak, RMS and thermal
- passive crossover frequency MF-HR from 2,150 Hz
- curve MF-HF of 24 dB/octave
- crossover frequency LF-MF from 710 Hz
- curve LF-MF from 24 dB / octave
- XLR signal input
- XLR signal output
- VDE power connector
- black rectangular multiplex birch housing with textured acrylic lacquer
- 1 handle on top and one on each side
- suited for 36mm speaker stands
- integrated stepless tilt unit
- metal front grille with 1.5mm acoustic foam
- 12x M10 mounting points
- power supply: 240 V
- dimensions: 440 x 880 x 500 mm (W x H x D)
- weight: 31 kg
Recensioner
Recensioner från andra länder
Översätt alla recensioner till svenska
Goede klank en best wel krachtig , niet geschikt voor het zwaardere werk. Bij vol vermogen wordt eerst het tophoog uitgeschakeld alvorens de limiter zijn werk doet.