- Hem /
- Produkter /
- Utgångna produkter /
- Roland /
- Roland M-380 V-Mixer
Roland M-380 V-Mixer
Allmänt
At Roland's sub brand RSS, much effort is invested in the continuous development and reinvention of live and digital audio mixing applications. The V-Mixing system is fully digital and makes use of REAC (Roland Ethernet Audio Communication) technology to send audio from the high-quality microphone preamplifiers to the mixer. The V-Mixing system is the next generation of live audio mixing technology.
The M-380 V-Mixer: sublime audio quality
The M-380 is a compact and rack-mountable console that works with the same mixing engine as the M-400, and is equipped with REAC, Roland's digital audio transmission technology. It enables you to create a powerful and configurable mixing environment with a high sound quality, an intuitive operation and a quick setup. Ideal for mobile applications or for installations with space restrictions.
Quick and easy setup
The V-Mixing system uses the REAC protocol between the stage units and the console by means of a simple CAT5e cable connection. The CAT5e connection is immune to the humming, buzzing and crosstalk usually associated with analogue snakes. Without any required configuration, you can simply plug the CAT5e cable from the stage units into the REAC A & B ports, which are located on the rear panel of the M-380 V-Mixer. Plug in, and you're good to go!
The M-380 V-Mixer is equipped with 13 x 100mm motorised and touch-sensitive faders, a large, clear 800 x 480 colour screen and dedicated effect knobs for EQ, Pan and Gain. All scene settings can be fully recalled. Thanks to the intuitive interface, which is easy to navigate, the mixer can be operated by both beginning and more experienced users.
Specifikationer
Vikt och mått inkluderar förpackning
- Vikt (inkl. förpackning) 1,0 kg
Produktspecifikationer
- PA and studio mixer
- number of channels: 48 inputs, 18 buses, 8 matrixes, 58 outputs
- sample rate: 48 kHz or 44.1 kHz
- signal processing: 24-bit
- internal processing: 56-bit
- frequency response console output jacks (1 to 8): -2 dB/+0 dB (20 kOhm load, +4 dBu)
- frequency response headphone jack: -3 dB/+0 dB (40 ohm load, 130 mW)
- THD+N console output jacks (1 to 8): 0.05% (typ., +4 dBu)
- THD+N headphone jack: 0.05% (typ., 40 ohm load, 130 mw)
- dynamic range console output jacks (1 to 8): 110 dB (typ.)
- crosstalk @ 1 kHz console input jacks: -80 dB (pad: on; input gain: +10 dBu; typ.)
- crosstalk @ 1 kHz console output jacks: -100 dB (typ.)
- nominal input level (variable) console input jacks (1 to 8) with pad on: -45 to +10 dBu (typ.)
- nominal input level (variable) console input jacks (1 to 8) with pad off: -65 to -10 dBu
- nominal input level (variable) stereo in jacks (L/R): -18 to 0 dBu
- nominal input level (variable) talkback mic in jack: -50 to 10 dBu
- pad: 20 dB on/off
- input impedance console input jacks (1 to 8): 14 kOhm
- input impedance stereo in jacks (L/R): 10 kOhm
- input impedance talkback mic in jack: 41 kOhm
- non clip maximum input level console input jacks (1 to 8) with pad off: +8 dBu
- non clip maximum input level console input jacks (1 to 8) with pad on: +28 dBu
- non clip maximum input level stereo in jacks (L/R): +18 dBu
- non clip maximum input level talkback mic in jack: +8 dBu
- nominal output level console output jacks (1 to 8): 600 ohm
- nominal output level phones jack: 100 ohm
- recommended load impedance console output jacks (1 to 8): 10 kOhm or more
- recommended load impedance phones jack: 8 ohm or more
- non clip maximum output level console output jacks (1 to 8): +22 dBu (1 kHz, 1 kOhm load)
- non clip maximum output level phones jack: 150 mW + 150 mW (1 kHz, 40 ohm load)
- console input jacks (1 to 8): XLR-3-31 type (balanced, phantom power)
- talkback mic in jack: XLR-3-31 type (balanced, phantom power)
- stereo in jacks (L/R): RCA phono type
- console output jacks (1 to 8) XLR-3-32 type (balanced)
- phones jack: stereo 6.3mm phone type
- digital out jacks x 2: optical type, coaxial type
- optical type, coaxial type: RJ-45 EtherCon type
- RS-232C connector: 9-pin D-sub type
- MIDI connectors (OUT/THRU, IN): 5-pin DIN type
- USB connectors: USB type A and type B
- display: 800 x 480 dots wide VGA backlit TFT full colour screen
- included accessories: power cable
- power consumption: 75 watt
- power supply: AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
- dimensions desktop: 482 x 220 x 581 mm
- dimensions rackmount: 482 x 551 x 231 mm
- weight: 14 kg
Residual noise level (IHF-A, typ.)
- -88 dBu (all faders: min.)
- -80 dBu (main fader: unity; channel faders: unity; only one CONSOLE IN channel; preamp gain: min.)
- -61 dBu (main fader: unity; channel faders: unity; only one CONSOLE IN channel; preamp gain: max.)
- -73 dBu (all faders: unity; preamp gain: min.; S-1608 + S-4000S-3208; total 48CH)
- -41 dBu (all faders: unity; preamp gain: max.; S-1608 + S-4000S-3208; total 48CH)
- input 150 ohm terminate
- output connector: CONSOLE OUTPUT jacks (1 to 8)
- sample rate: 48 kHz or 44.1 kHz
Equivalent input noise level (E.I.N.):
- -126 dBu (main fader: unity; channel faders: unity; only one CONSOLE IN; preamp gain: max.)
- output connector: CONSOLE OUTPUT jacks (1 to 8)
- sample rate: 48 kHz or 44.1 kHz
Network latency:
- 2,8 mS (typ.) *1
- total system latency of audio signal from S-1608 to outputs
- via REAC ports (A or B)
- sample rate: 48 kHz
- effects: no insert effects