- Hem /
- Produkter /
- Mikrofoner /
- Studiomikrofoner /
- Studio kondensatormikrofoner /
- Stormembrans kondensatormikrofoner /
- SE Electronics /
- SE Electronics SE4400A-ST stereopar kondensatormikrofon
SE Electronics SE4400A-ST stereopar kondensatormikrofon
Allmänt
This set consists of two sE Electronics 4400A condenser microphones, which together, let you create recordings in a mono stereo signal. The SE4400A is mainly the same as the SE2200A, but it has a double diaphragm, instead of the one.
You can especially notice this in the improved cardioid pickup pattern. Talking of pickup patterns, you can switch between four different ones - cardioid, super-cardioid, omnidirectional or figure-8. This way, you can always use this microphone to ideally record or amplify your sound source, adjusting the pickup pattern to the use.
The sE Electronics 4400A has a flat design, so that it can be placed very close to (bass) guitar amps and drumheads. It can also be used for vocal recordings and live gigs in pubs. Furthermore, a shockmount is included that fits on any microphone stand.
The microphone is suspended just out of the shockmount, so that the SE4400A is ideal for close-miking. With this microphone you can select the pickup pattern that matches your application - you will be hard put to find a use for which it isn't useful!
Tips eller kommentarer om den här produkten
-
SE Electronics har komponerat en praktisk tabell som visar dig vilken mikrofon som passar din uppsättning.
Specifikationer
Produktfunktioner
- Rörmikrofon nej
- Känslighet mikrofon -37
- Impedans mikrofon 50-99 Ohm
- Low-cut filter Ja
- Maximal SPL 130 dB - 139 dB
- Maximal frekvens 20 - 20,9 kHz
- Mikrofontillbehör shockmount, stereobar
- Minimal frekvens 20 - 21 Hz
- Padswitch Ja
- Riktningskarakteristik kardioid, figur-8/bidirektionell, omnidirektionell, multiriktad
- Stereo ja, matchat par
Vikt och mått inkluderar förpackning
- Vikt (inkl. förpackning) 4,1 kg
- Mått (inkl. förpackning) 36,0 x 27,5 x 15,0 cm
Produktspecifikationer
- frequency range: 20 Hz to 20 kHz
- sensitivity: 14.1 mV/Pa -34 ± 1dB
- selectable cardioid pickup pattern, cardioid, figure-8, omnidirectional, super-cardioid
- impedance ≤ 50 ohms
- signal/noise ratio: 17 dB
- maximum SPL 0.5 % THD at 1,000 Hz: 130 dB
- required power supply: phantom power 48V ±4V