- Hem /
- Produkter /
- Pro Audio /
- Högtalare /
- Passiv fullrange /
- dB Technologies /
- DB Technologies Arena 10 passiv högtalare
DB Technologies Arena 10 passiv högtalare
Allmänt
The Arena 10 is a two-way passive speaker with an 10-inch woofer, that features a 2-inch voice coil for the low frequencies and a 1-inch tweeter with PTC driver protection for the high frequencies. The speaker can take up to 300 watts RMS, and produces a maximum sound pressure of 125 dB (SPL). The Arena 10 is delivered with a protective cover.
Additionally, the Arena 10 features M8 mounting points with screw threads for mounting a speaker cabinet with, for example, eyebolts on chains, or ropes.
For the high tones, the Arena 10 has a rotatable high-frequency horn for constant dispersion. Through the rotating of the horn, this directivity can be adjusted, regardless of whether the speaker is set up vertically or horizontally.
Thanks to the multifunctional housing, this speaker can also be used as a floor monitor, satellite speaker in combination with subwoofers, or as a full-range system on speaker stands.
Specifikationer
Produktfunktioner
- Diameter woofer 10 tum
- Diameter tweeter 1 tum
- Känslighet ospecificerat
- Vikt per högtalare 12 kg
- Installationshögtalare/100 Volt nej
- Maximal SPL 120 dB - 129 dB
- Maximal frekvens 19 - 19,9 kHz
- Minimal frekvens 80 - 99 Hz
- Nominellt motstånd 8 Ohm
- Toppbelastning i Watt 500 - 749 Watt
- RMS-belastning i Watt 200 - 349 Watt
- Set nej
Vikt och mått inkluderar förpackning
- Vikt (inkl. förpackning) 13,5 kg
- Mått (inkl. förpackning) 58,0 x 41,0 x 41,0 cm
Produktspecifikationer
- two-way passive speaker
- nominal power of 300W
- peak power of 600W
- impedance of 8 ohm
- frequency response of 95 to 19,000 Hz at approximately 0 dB
- maximum sound pressure level of 125 dB (SPL)
- 1-inch HF tweeter
- PTC driver protection
- dispersion: 90 x 70 degrees
- rotatable CD horn
- passive crossover frequency: 2,100 Hz
- curve MF-HF 18 dB / octave
- 10-inch LF woofer with 2-inch voice coil
- 1x lockable speaker connector for signal input (Pin 1 +=+; Pin 1 -=-)
- 1x lockable speaker connector for signal output (Pin 1 +=+; Pin 1 -=-)
- black, multifunctional multiplex birch housing with textured acrylic lacquer
- 1 hand grip per side
- suited for 36mm speaker stands
- 45-degree angle placement for use as a monitor, for example
- metal front grille with acoustic foam on front side
- 12x M8 mounting points
- dimensions: 321 x 508 x 320 mm (W x H x D)
- weight: 12.2 kg