- Hem /
- Produkter /
- Flightcases & Bags /
- Flightcase material /
- Flightcase vinkellister
Flightcase vinkellister
59 produkter har hittats
Popu
lär
lär
Bygger du en flightcase åt dina dyra apparaturer? Med en Penn Elcom 0122 aluminium hörnprofil sätter du pricken över i. Din flightcase blir då mer stabil och blir mer stöttålig.
I lager
Beställ före 18:00 = leverans Måndag
I lager
91 kr
66 kr
Popu
lär
lär
Penn Elcom 0100 aluminium vinkelprofil 30 x 30 x 1,5 mm skyddar ditt flightcase under transport.
I lager
Beställ före 18:00 = leverans Måndag
I lager
112 kr
94 kr
Popu
lär
lär
Are you building a flight case for your valuable equipment? With this aluminium angle extrusion you will be able to finish it off nicely! Keep your flight case secure and protected turning transport.
I lager
Beställ före 18:00 = leverans Måndag
I lager
109 kr
76 kr
Popu
lär
lär
Give your DIY flightcase the finishing touch with this aluminium extrusion. The Penn Elcom 0522 is ideal for DIY flightcases.
I lager
Beställ före 18:00 = leverans Måndag
I lager
118 kr
114 kr
Popu
lär
lär
This rack strip is equipped with punched holes with a diameter of 9.5 mm each. The holes that are used for the mounting of the strip to the flight case have a diameter of 5 mm each. The rack strip is made of 2.0mm steel and is 4 U.
I lager
Beställ före 18:00 = leverans Måndag
I lager
65 kr
48 kr
-82%
This Penn Elcom double rack profile is 3U high and comes pre-drilled with holes at 15mm intervals for eased installation.
I lager
Beställ före 18:00 = leverans Måndag
I lager
252 kr
45 kr
Håller du på att bygga din egen flightcase för din dyra apparatur? Med denna Penn Elcom 0581
slutprofil förser du kanterna klara för slutningen mellan kista och lock. Denna profil passar alla plattor med en tjocklek på 9,5mm.
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
83 kr
82 kr
With this angle extrusion, your flight case will stay in one piece and is protected against bumps during transport. It is fit for wooden plates with a gauge of 10 mm.
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
229 kr
180 kr
This rack strip is fitted with 9.5mm punched holes and has 5mm mounting holes for attachment to a flight case. This rack strip is made of 2.0mm steel and has a height of 3 U.
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
42 kr
38 kr
This aluminium extrusion puts the clean finishing touch on any self-built flight case. The Penn Elcom 0522 is 10.2mm thick and has been grooved along the entire 1.7-metre length.
Uppskattad leveranstid: 13 dagar.
Cirka 13 arbetsdagar
153 kr
149 kr
The Penn Elcom E2215 U-shape extrusion is made of aluminium and is compatible with 9mm (3/8") thick boards, making it the ideal finishing touch for any self-built DJ furniture.
I lager
Beställ före 18:00 = leverans Måndag
I lager
69 kr
If you are building a flight case for your valuable equipment, this edge extrusion is a great finishing touch. It is suited for plates with a thickness of 6.8 mm.
I lager
Beställ före 18:00 = leverans Måndag
I lager
99 kr
68 kr
This rack strip is equipped with 9.5mm punched holes and 5mm mounting holes. The strip is made of 2.0 mm steel and is 6 U high.
I lager
Beställ före 18:00 = leverans Måndag
I lager
275 kr
68 kr
This rack strip is fashioned from 2mm steel and has a height of 8 U.
I lager
Beställ före 18:00 = leverans Måndag
I lager
98 kr
84 kr
The rack is made of 2.0mm steel and is 16 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
I lager
Beställ före 18:00 = leverans Måndag
I lager
153 kr
This rack strip is made of 2.0mm steel and has a height of 14 U. It has 9.5mm holes at 15mm intervals, allowing you to mount any equipment you like.
I lager
Beställ före 18:00 = leverans Måndag
I lager
134 kr
128 kr
This rack strip features 9.5mm diameter punched holes at 15mm intervals. It can easily be attached to a flight case by means of its 5mm mounting holes. This rack strip is fashioned from 2.00mm steel and has a height of 2 U.
I lager
Beställ före 18:00 = leverans Måndag
I lager
154 kr
33 kr
This rack strip is fashioned from 2.0mm steel and has a height of 12 U.
I lager
Beställ före 18:00 = leverans Måndag
I lager
118 kr
107 kr
The rack strip is made of 2.0 mm thick steel and has a height of 18 U. The holes have an interval of 15 mm so you are free to mount any device possible to this rack profile.
I lager
Beställ före 18:00 = leverans Måndag
I lager
172 kr
156 kr
Working on a custom flight case? Don't forget to finish the base with this Penn Elcom NC2DAE double-angle extrusion for maximum durability.
I lager
Beställ före 18:00 = leverans Måndag
I lager
439 kr
438 kr
This rack strip is fashioned from 2.00mm steel and has a height of 20 U. Because it has mounting holes at 15mm intervals, you are free to mount any equipment you like.
I lager
Beställ före 18:00 = leverans Måndag
I lager
190 kr
160 kr
This 1.7-metre-long rack profile is made of 3mm aluminium and features pre-drilled holes with a 9.5mm diameter.
I lager
Beställ före 18:00 = leverans Måndag
I lager
609 kr
246 kr
The Penn Elcom 0491 Slam-Lid profile has a 10mm interior depth and is fully compatible with the EG-0100 angled extrusion, both in terms of finish and grooves.
I lager
Beställ före 18:00 = leverans Måndag
I lager
252 kr
52 kr
The 6108 sliding profile is easy to install in a flight case and serves to support a rack shelf or keyboard drawer. Made by Penn Elcom, so high-quality is guaranteed!
I lager
Beställ före 18:00 = leverans Måndag
I lager
331 kr
62 kr
I lager
Beställ före 18:00 = leverans Måndag
I lager
321 kr
38 kr
This single angle extrusion by Penn Elcom is made of aluminium and has a length of 1.70 m.
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
105 kr
68 kr
Add several of these aluminium protective corners to your flight case to keep it held together nicely and protected against bumps during transport.
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
149 kr
115 kr
Putting together your own flight case? The Penn Elcom 0153 double angle extrusion will help protect it against knocks and bumps. It's 6.8mm thick and compatible with wooden panels.
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
173 kr
The rack is made of 2.0mm steel and is 10 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
I lager
Beställ före 18:00 = leverans Måndag
I lager
296 kr
101 kr
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
191 kr
145 kr
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
369 kr
355 kr
The Penn Elcom 6020 aluminium rack profile is designed to complete a cage-nut based sliding system. This profile is 100cm long, 25mm wide, and 25mm deep.
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
366 kr
332 kr
Working on a custom flight case? Why not polish it off with this 30mm-high, anodised aluminium lid profile from Penn Elcom?
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
220 kr
153 kr
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
219 kr
211 kr
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
217 kr
211 kr
Do you want to build a tray or keyboard drawer in your flightcase or do you need a slide rail for said flightcase? This is what you need!
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
431 kr
403 kr
Uppskattad leveranstid: 5 dagar.
Cirka 5 arbetsdagar
244 kr
235 kr
Uppskattad leveranstid: 8 dagar.
Cirka 8 arbetsdagar
380 kr
370 kr
Uppskattad leveranstid: 14 dagar.
Cirka 14 arbetsdagar
129 kr
105 kr
This Penn Elcom double rack profile is 18U high and comes pre-drilled with holes at 15mm intervals for eased installation.
Uppskattad leveranstid: 13 dagar.
Cirka 13 arbetsdagar
302 kr
207 kr
The Penn Elcom 6060 is a 1.7 metre-long aluminium rack extrusion with a sliding system.
Uppskattad leveranstid: 14 dagar.
Cirka 14 arbetsdagar
195 kr
186 kr
Uppskattad leveranstid: 14 dagar.
Cirka 14 arbetsdagar
382 kr
229 kr
This double rack profile from Penn Elcom comes with die-cut holes that have been spread 15mm apart for flexible gear installation. This model has a 16U height.
Uppskattad leveranstid: 13 dagar.
Cirka 13 arbetsdagar
345 kr
187 kr
For eased gear-installation, this double rack profile from Penn Elcom features die-cut holes every 15mm and measures 14U in height.
Uppskattad leveranstid: 13 dagar.
Cirka 13 arbetsdagar
188 kr
167 kr
This Penn Elcom double rack profile is 12U high and comes pre-drilled with holes at 15mm intervals for eased installation.
Uppskattad leveranstid: 13 dagar.
Cirka 13 arbetsdagar
308 kr
146 kr
This Penn Elcom double rack profile is 10U high and comes pre-drilled with holes at 15mm intervals for eased installation.
Uppskattad leveranstid: 13 dagar.
Cirka 13 arbetsdagar
295 kr
126 kr
Uppskattad leveranstid: 14 dagar.
Cirka 14 arbetsdagar
270 kr
85 kr
This Penn Elcom double rack profile is 4U high and comes pre-drilled with holes at 15mm intervals for eased installation.
Uppskattad leveranstid: 14 dagar.
Cirka 14 arbetsdagar
258 kr
64 kr