Enttec RDS8 8-Port DMX/RDM Splitter

Inte tillgänglig? Här hittar du några alternativ.

Utgången, den här produkten kan inte längre beställas.

Paketerbjudande
Rekommenderade set
Produktinformation
Recensioner

30 dagars "pengarna tillbaka" garanti!

Andra köpte också

Produktinformation
Recensioner

Enttec RDS8 8-Port DMX/RDM Splitter Produktnr: 9000-0063-9074 Garantitid: Denna produkt levereras med 2 års garanti.

Allmänt

The Enttec RDS8 8 is a tight 8-port DMX/RDM splitter complete with a single 5-pin DMX input and eight 5-pin DMX outputs. Select one of the three provided modes to get the best possible functionality out of your DMX and RDM gear. In Normal mode, for example, your DMX data is allowed to pass through at the same time as the flow of two-way RDM data traffic and, if you're using some older DMX gear that tends to react strangely to RDM commands, flip to Filter mode to literally filter out any RDM data from the signal. The RDS-8 also provides insulation between inputs and outputs of up to 1,000V, optimally protecting your lighting desk and preventing any voltage peaks from overloading other DMX chains.

Specifikationer

Vikt och mått inkluderar förpackning

Vikt (inkl. förpackning) 1,4 kg
Mått (inkl. förpackning) 52,0 x 21,5 x 12,5 cm

Produktspecifikationer

Enttec RDS8
1 5-pin DMX input
8 5-pin DMX outputs
3 modes
- Normal mode: passes two-way RDM data traffic and DMX level information
- Filter mode: filters out all RDM information to avoid errors with older DMX gear
- Bypass mode: switches all intelligent RDM data traffic so that the RDS-8 operates as a standard DMX splitter
1,000V insulation between inputs and outputs for controller and DMX fixture protection
19-inch rack: 1U